MUST Website
 
news about teachers downloads photos links
pic
 
Chairman
 
Professor
 
Associate Professor
 
Assistant Professor
 
Lecturer
 
Assistant
 
 
   
03-5593142-3001 Tel
   
03-5595142 Fax
   
E-mail
   


  Professor  
:::
teacher pic
Name Yung-Kuang Yang
   
Title Professor
   
E-mail yky@must.edu.tw
   
Tel 03-5593142ext.3007
   
Education & Experience National Central University,PhD.
   
Discipline Hydranlics&Pneumatics Design;
Transmission Device Design;
   
Major in Hydranlics&Pneumatics Control;
Transmission Device Design;
Tribology Technology Application;
   
Other 期刊論文:(*通訊作者)
1.Yung-Kuang Yang* and Ming-Chang, Jeng, (2001), “Analysis of Thermal Effects on the Misaligned Hydraulic Servo Cylinder”, Tribology International, 34, pp.95–106, [SCI & EI].
2.Ming-Chang, Jeng and Yung-Kuang, Yang*, (2002), “Comparison of Thermal Effects on the Conical-Cylindrical Bearing with 2-D and 3-D Energy Equations”, Tribology Transactions, 45(1), pp.67–75, [SCI & EI].
3.Yung-Kuang, Yang* and Ming-Chang, Jeng, (2003), “Thermohydrodynamic Analysis of the Misaligned ConicalCylindrical Bearing with non-Newtonian Lubricants”, Tribology Transactions, 46(2), pp.161–169, [SCI & EI].
4.Yung-Kuang, Yang and Ming-Chang, Jeng, (2004), “Analysis of Viscosity Interaction and Heat Transfer on the Dual Conical-Cylindrical Bearing”, Tribology Transactions, 47(1), pp. 77–85, (NSC-92-2622-E-159-001), [SCI & EI].
5.Yung-Kuang, Yang* and Ming-Chang, Jeng, (2004), “Analysis of Viscosity Interaction on the Misaligned Conical-Cylindrical Bearing”, Tribology International, 37, pp 51–60, (NSC-92-2622-E-159-001), [SCI & EI].
6.Yung-Kuang, Yang*, Rong-Tai, Yang and Ming-Chang, Jeng, (2004,10), “Pressure Loading Analysis of the Misaligned ConicalCylindrical Bearing with non-Newtonian Lubricants”, CJME, 17(4), pp.585–590, (NSC-93-2622-E-159-002), [EI].
7.Yung-Kuang, Yang and Chorng-Jyh, Tzeng (2005), “Grey Relational Analysis of Die Casting Parameters for AZ91D in Up-cover of Notebook Computer”, The Journal of Gray System, 17(1), pp. 23–34.
8.Rong-Tai, Yang, Yung-Kuang, Yang*, Shieu-Shien, Lin and Ming-Chang, Jeng, (2005), “Analysis and Design of Thermohydrodynamic on the Hydraulic Servo Cylinder”, JSME Series C, 48(3), pp. 351–358, (NSC-93-2622-E-159-002), [SCI & EI].
9.Yung-Kuang, Yang*, (2005), “Study on the Grey Relational Analysis to Controller Design of Electro-Hydraulic Servo Force Control”, The Journal of Gray System, 17(4), 309–326, (NSC-93-2622-E-159-002).
10.Yung-Kuang, Yang* and Chorng-Jyh, Tzeng, (2006, 6), “Die Casting Parameter Sizing for AZ91D in Notebook Computer Base Shell”, Materials and Manufacturing Processes, 21(5), pp.489–494, [SCI & EI].
11.Yung-Kuang, Yang*, (2006, 7), “Optimization of Injection Molding Process for Mechanical and Tribological Properties of Short Glass Fiber and Polytetrafluoroethylene Reinforced Polycarbonate Composites with Grey Relational Analysis: A Case Study”, Polymer-Plastics Technology and Engineering, 45(7), pp.769–777, [SCI & EI].
12.Yung-Kuang, Yang*, (2006, 8), “Optimization of a Photo Resist Coating Process for Photolithography in Wafer Manufacturing via Design of Experiments Method”, Microelectronics International, 23(3), pp.26–32, [SCI & EI].
13.Yung-Kuang, Yang* and Tsun-Ching, Chang, (2006, 8), “Experimental analysis and optimization of a photo resist coating process for photolithography in wafer fabrication”, Microelectronics Journal, 37(8), pp.746–751, [SCI & EI].
14.Yung-Kuang, Yang*, (2006, 9), “Optimization of Injection Molding Process for Mechanical Properties of Short Glass Fiber and Polytetrafluoroethylene Reinforced Polycarbonate Composites: A Case Study”, Journal of Reinforced Plastics and Composites, 25(12), pp.1279–1290, [SCI & EI].
15.Yung-Kuang, Yang* and Ming-Chang, Jeng, (2006, 10), “Thermohydrodynamic Analysis and Design of Dual Conical-Cylindrical Bearings Using Non-Newtonian Lubricants”, Tribology Transactions, 49(4), pp.554–562, (NSC-93-2622-E-159-002), [SCI & EI].
16.Yung-Kuang, Yang*, Jie-Ren, Shie, Rong-Tai, Yang and Hua-An, Chang, (2006, 10), “Optimization of Injection Molding Process for Contour Distortions of Polypropylene Composite Components via Design of Experiments Method”, Journal of Reinforced Plastics and Composites, 25(15), pp.1585–1599, [SCI & EI].
17.Yung-Kuang, Yang*, Jie-Ren, Shie and Cheng-Hung, Huang, (2006, 11), “Optimization of Dry Machining Parameters for High-Purity Graphite in End Milling Process”, Materials and Manufacturing Processes, 21(8), pp.832–837, (NSC-95-2622-E-159-001-CC3), [SCI & EI].
18.Yung-Kuang, Yang*, (2006, 11), “Optimization of Injection-Molding Process of Short Glass Fiber and Polytetrafluoroethylene Reinforced Polycarbonate Composites via Design of Experiments Method: A Case Study”, Materials and Manufacturing Processes, 21(8), pp.915–921, [SCI & EI].
19.Yu-Hsin, Lin, Wei-Jaw, Deng, Jie-Ren, Shie and Yung-Kuang, Yang*, (2007, 4), “Optimization of reflow soldering process for BGA packages by artificial neural network”, Microelectronics International, 24(2), pp.64–70, [SCI & EI].
20.Yu-Hsin, Lin, Wei-Jaw, Deng, Cheng-Hung, Huang and Yung-Kuang, Yang*, (2008, 1), “Optimization of Injection Molding Process for Tensile and Wear Properties of Polypropylene Components via Taguchi and Design of Experiments Method”, Polymer-Plastics Technology and Engineering, 47(1), pp.96–105, [SCI & EI].
21.Chorng-Jyh, Tzeng and Yung-Kuang, Yang*, (2008, 4), “Determination of Optimal Parameters for SKD11 CNC Turning Process”, Materials and Manufacturing Processes, 23(4), pp.363–368, [SCI & EI].
22.Yung-Kuang, Yang*, Jie-Ren, Shie, Hsin-Te, Liao, Jeong-Lian, Wen and Rong-Tai, Yang, (2008, 5), “A Study of Taguchi and Design of Experiments Method in Injection Molding Process for Polypropylene Components”, Journal of Reinforced Plastics and Composites, 27(8), pp.819–834, [SCI & EI].
23.Jie-Ren, Shie and Yung-Kuang, Yang, (2008, 7), “Optimizations of a photoresist coating process for photolithography in wafer manufacture via a radial basis neural network: A case study”, Microelectronic Engineering, Vol. 85, No. 7, pp. 1664-1670. [SCI & EI].
24.Hsin-Te, Liao, Jie-Ren, Shie and Yung-Kuang, Yang*, (2008, 9), “Applications of Taguchi and Design of Experiments Methods in Optimization of Chemical Mechanical Polishing Process Parameters”, International Journal of Advanced Manufacturing Technology, 38(7–8), pp.674–682, [SCI & EI].
25.Jeong-Lian, Wen, Jie-Ren, Shie and Yung-Kuang, Yang, (2009, 2), “Optimization of a Wear Property of Die Cast AZ91D Components via a Neural Network”, Materials and Manufacturing Processes, 24(4), pp.400–408, (NSC-95-2622-E-159-001-CC3), [SCI & EI].
26.Jeong-Lian, Wen, Yung-Kuang, Yang* and Ming-Chang, Jeng, (2009, 3), “Optimization of Die Casting Conditions for Wear Properties of Alloy AZ91D Components Using the Taguchi Method and Design of Experiments Analysis”, International Journal of Advanced Manufacturing Technology, 41(5-6), pp.430–439, (NSC-95-2622-E-159-001-CC3), [SCI & EI].
27.Chorng-Jyh, Tzeng, Yu-Hsin, Lin, Yung-Kuang, Yang* and Ming-Chang, Jeng, (2009, 3), “Optimization of Turning Operations with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis”, Journal of Materials Processing Technology, 209, 2753–2759, (NSC-95-2622-E-159-001-CC3), [SCI & EI].
28.Ming-Tsan, Chuang and Yung-Kuang, Yang*, (2009, 3), “Simulation Study on Optimization of Injection Molding Process for Thin-shell Plastic Parts via the Taguchi Method and Grey Relational Analysis”, International Polymer Processing, XXIV (1), pp.51–58, (NSC-97-2221-E-159-006), [SCI & EI].
29.Show-Shyan, Lin, Ming-Tsan, Chuang, Jeong-Lian Wen, and Yung-Kuang, Yang*, (2009, 4), “Optimization of 6061T6 CNC Boring Process Using the Taguchi Method and Grey Relational Analysis”, The Open Industrial and Manufacturing Engineering Journal, 2, pp.14–20, (NSC-95-2622-E-159-001-CC3).
30.Yung-Kuang, Yang*, Ming-Tsan, Chuang and Show-Shyan, Lin, (2009, 5), “Optimization of Dry Machining Parameters for High-Purity Graphite in End Milling Process via Design of Experiments Methods”, Journal of Materials Processing Technology, 209, pp.4395–4400, (NSC-95-2622-E-159-001-CC3). [SCI & EI].
31.Ming-Tsan Chuang and Yung-Kuang Yang*, Yun-Hsiang Hsiao, (2009, 7), “Modeling and Optimization of Injection Molding Process Parameters for Thin-shell Plastic Parts”, Polymer-Plastics Technology and Engineering, 48(7), pp.745–753, (NSC-97-2221-E-159-006), [SCI & EI].
32.Ching-Piao, Chen, Ming-Tsan, Chuang, Yun-Hsiang, Hsiao, Yung-Kuang, Yang and Chih-Hung, Tsai, (2009, 9), “Simulation and Experimental Study in Determining Injection Molding Process Parameters for Thin-shell Plastic Parts via Design of Experiments Analysis”, Expert Systems With Applications, 36, 10752–10759, (NSC-97-2221-E-159-006), [SCI & EI].
33.Jen-Chang Lin, Yung-Kuang Yang* and Yun-Hsiang Hsiao, (2010, 1), “Optimization of Injection Molding Parameters for Thin-shell Plastic Parts using a neural network–based approach”, Polymer-Plastics Technology and Engineering, 49: 1, 53 – 61, (NSC-97-2221-E-159-006), [SCI & EI].
34.Show-Shyan Lin, Jen-Chang Lin and Yung-Kuang Yang*, (2010, 2), “Optimization of Mechanical Characteristics of Short Glass Fiber and Polytetrafluoroethylene Reinforced Polycarbonate Composites via D-optimal Mixture Design”, Polymer-Plastics Technology and Engineering, 49(2), 195 – 203, (NSC-97-2221-E-159-006), [SCI & EI].
35.Hsien-ching Chen, Jen-Chang Lin, Yung-Kuang Yang and Chih-Hung, Tsai, (2010, 10) “Optimization of Wire Electrical Discharge Machining for Pure Tungsten Using a Neural Network Integrated Simulated Annealing Approach”, Expert Systems With Applications, 37, 7147–7153, (NSC-97-2221-E-159-006), [SCI & EI].
36.Chorng-Jyh Tzeng, Yung-Kuang Yang*, Ming-Hua Hsieh, Chun-yuan Chen, (2011, 4) “Adaptive adjustment of Injection Molding Process for Mechanical Characteristics Using the Taguchi Method and Response Surface Methodology”, Polymer-Plastics Technology and Engineering, 50(6), 552 – 563, (NSC-98-2221-E-159-007), [SCI & EI].
37.Chorng-Jyh Tzeng, Yung-Kuang Yang*, Ming-Hua Hsieh and Ming-Chang Jeng (2011, 6), “Optimization of wire electrical discharge machining of pure tungsten using neural network and response surface methodology”, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 225(6), 841 – 852, (PT097130275), [SCI & EI].
38.Yung-Kuang Yang*, Chorng-Jyh Tzeng, Rong-Tai Yang and Ming-Hua Hsieh (2011, 11), “Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d-optimal mixture design”, POLYMERS FOR ADVANCED TECHNOLOGIES, 22, 2191–2200, (NSC-97-2221-E-159-006), [SCI & EI].
39.Rong-Tai, Yang and Yung-Kuang Yang*, Chun-yuan Chen, (2011, 11) “Optimization of Injection Molding Process for SGF and PTFE Reinforced PC Composites Using Response Surface Methodology and Simulated Annealing Approach”, International Polymer Processing, XXVI (5), 524 – 539, (NSC-98-2221-E-159-007), [SCI & EI].
40.Rong-Tai Yang, Hsin-Te Liao, Yung-Kuang Yang*, and Show-Shyan Lin, (2012, 01), “Modelling and Optimization in Computer Numerical Control Precise Boring Process for Aluminum Alloy 6061T6 Component”, International Journal of Precision Engineering and Manufacturing, 13(1), 11–16, [SCI & EI].
41.Yung-Kuang Yang*, Rong-Tai Yang, Chorng-Jyh Tzeng (2012, 02),“Optimization of mechanical characteristics of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites using the neural network approach”, Expert Systems With Applications, 39, 3783–3792, (NSC-97-2221-E-159-006), [SCI & EI].
42.Rong-Tai, Yang, Chorng-Jyh Tzeng, Yung-Kuang Yang*, Ming-Hua Hsieh, “Optimization of Wire Electrical Discharge Machining Process Parameters for Cutting Tungsten, (PT097130275), (2011, 8, 20, on line), International Journal of Advanced Manufacturing Technology), [SCI & EI].
43.Chorng-Jyh Tzeng ,Yung-Kuang Yang,Yu-Hsin Lin, Chih-Hung Tsai,(2012, 2, 20, on line), “A study of optimization of injection molding process parameters for SGF and PTFE reinforced PC composites using neural network and response surface methodology, International Journal of Advanced Manufacturing Technology), (NSC-98-2221-E-159-007), [SCI & EI].
   
 

Back
Top

 
 
 
must LOGO